Grouting and tiling, finished properly.
Specialists in grout systems and tile installation for homes and commercial spaces across Malaysia.
A good finish starts inside the joint.
Cracked, stained or hollow grout is raked out and the dust cleared, so new grout bonds to clean, sound edges.
Filled full. Tooled straight. Colour mixed by weight.
Each joint is finished with a grout system chosen for that room. Custom colours are weighed out to a saved formula.
100+ projects by our founding team.
Prima in numbers
Two trades. One standard.
Grouting has been our specialty from day one. Tiling is now a core service too, so the same team can lay the tile and finish the joint.
Grouting & regrouting
New grout for newly laid tiles, and old grout replaced while your tiles stay in place.
- Polyurea, hydrogenated epoxy and organosilicon grout systems
- Wet areas: bathrooms, kitchens and balconies
- Custom colours weighed out to a saved formula
Tile installationNew
Floor and wall tiles set out, levelled and bedded properly, then grouted by the same team.
- Large-format floor and wall tiles
- Levelling clips for flush, even edges
- Re-tiling and hollow tile repair
See the difference.
Same kitchen floor, same angle, photographed a day apart during a regrout in Penang. Drag the line to compare the old grout with the new.
Every comparison on this site uses real photos from the project itself, cropped only to hide camera stamps. No mock-ups, no stock images.
How every job runs.
Most repair work fails because the real cause was never found. So we look first, and fix second.
Assess first
We check the tiles, the joints and what sits underneath, both what you can see and what you cannot.
Find the cause
Stains, cracks and hollow tiles usually have a reason. We find it before we recommend anything.
Apply the right system
The grout or tiling method is chosen for the room: wet or dry, indoor or outdoor, foot traffic and sun.
Follow up regularly
Even after the work is finished, we follow up with our clients regularly.
Colour mixed to the gram.
When a job needs a custom grout colour, each pigment is weighed against a saved formula. That way a second batch can match the first.
- Joint
Old grout is raked out before regrouting, so the new grout sits in the joint rather than as a thin layer on top.
- Clean
Joints are cleared of dust and debris before they are filled.
- Finish
Excess grout is cleaned off the tile face before it cures.
Finished work, across Malaysia.
From condominiums and offices in Kuala Lumpur to a hotel in Penang and homes in Ipoh, Muar and Mentakab.
Tell us about your floor or wall.
Send a few photos on WhatsApp. We will tell you what we see and what it would take to fix it properly.